Changzhou Bextreme Shell Motor Technology Co.,Ltd
Professional BLDC motor products manufacturer and solution supplier!
Add to Cart
Model No. JYQD-YL02D
Selection Table
JYQD-YL02D(8559) direct start version has NO LOCK function,(linear speed regulation 0-5V,liner brake:0-5V)
JYQD-YL02D(457E) direct start version has NO LOCK function,(linear speed regulation 0-2.5V,liner brake:0-2.5V)
JYQD-YL-02D(99F2)safety start version has LOCK function.(linear speed regulation 0-5V,liner brake:0-5V)
JYQD-YL-02D(C737)safety start version has LOCK function.(linear speed regulation 0-2.5V,liner brake:0-2.5V)
Safety start: if you use a knob~style potentiometer to adjust the speed, if the potentiometer not rest to 0 before stop, the motor will direct start according
Important reminder
1:Different Hall effect sensored BLDC motor has different Hall wires sequence, please do well-match before onload drive.
2: Add heatsink if the power more than 100W and keep good heat dissipation conditions for the board.
Operating temp.: -20—85℃
Operating voltage: 12-36VDC
Cont. working current: 15A
PWM speed control PWM frequency:1K-10KHZ; Duty cycle 0-100%
Analog voltage speed regulation :0-5V
Speed pulse signal output :YES
Dual-motor drive mode: 540W each
Features: Can drive two motor at same time, can be single or double controlled.
has Reactive power brake function, Brake reverse charging protection release circuit, can be MCU controlled,
The "5V" port on the board can offer 300mA current to external MCU
Wiring
MA---motor phase
MB---motor phase
MC---motor phase
P+ ---DC+
P- ---- DC-
HA---Hall sensor
HB---Hall sensor
HC---Hall sensor
5V---Hall sensor 5V
GND---Hall sensor GND
GND: Only for control signal
VR: Speed regulation,(0-2.5V or 0-5V linear speed regulation).PWM frequency:1K-5KHz.
ZF: Forward and backward control(5V high level or 0V low level, if you use 3.3V MCU, you need do adjustment to 5V)
M:speed pulse signal output
EL: brake function, 0-2.5V or 0-5V linear brake
5V:5V power source for external control device(≤300mA)
Dimensions